|
Material Properties Units
Home
Up
Material Properties List
Units
|
At present, it is anticipated that all temperatures will be
specified in degrees centigrade and all crystalline properties will be specified in
Angstroms. The direction (perpendicular or parallel) refers to the sample measurement
direction in relation to the grain direction. For the other properties contained within
the database, suggested/currently supported units are as contained in the following table. |
Currently Supported Units
| Neutron Fluence |
nvt*10-21(E>0.18MeV) |
| |
nvt*10-21(E>0.05 MeV) |
| |
1025 n/m2(EDND) |
| |
1020 n/cm2(EDND) (This is the preferred unit of dose if a choice is
available) |
| |
1024 n/cm2 (E>29fJ) |
| Elastic Moduli |
GPa |
| Electrical Resistivity |
ohm-cm*104 |
| Strength |
MPa |
| Coefficient of Thermal Expansion |
10-6K-1 |
| Density |
g/cm3 |
| Thermal Conductivity |
W/mK |
| Applied Stress |
Pa |
| Dimensional Change |
Expressed as a percentage difference |
| Sonic Velocity |
m/s |
| Attenuation |
db/mm |
| Stored Energy |
J/g |
Back to Top
|
